Installation of Synthetic Turf in Folsom, California

Installing artificial grass is a practical way to achieve a lush, green lawn without the maintenance required by natural grass. Here’s a detailed guide for homeowners looking to undertake this project:

1. Planning and Preparation Synthetic Turf

Assess Your Needs:

• Purpose: Consider how the space will be used (e.g., pets, children, decoration) to select the appropriate Synthetic Turf. All of Artificial Grass & Landscaping turf is pet friendly and comes with our TurfCool.
• Measurements: Accurately measure your area to determine the amount of artificial grass and other materials needed.

Choose Your Artificial Grass for your home in Folsom:

• Pile Height: Taller grass looks lush but may be less durable, while shorter grass is tougher.
• Density and Weight: Higher density and weight typically indicate better quality.
• Color and Texture: Options vary from bright to olive green, and some have brown thatch to look more natural.

Gather Materials and Tools:

• Weed barrier fabric
• Crushed base material (typically 1/2 to 3/4 inch crushed granite, limestone, or DG)
• Sand for leveling
• Artificial grass
• Nails or turf staples
• Seaming tape and glue (if joining two pieces)
• Utility knife
• Compactor (can be rented)
• Landscape rake or broom

2. Base Preparation in Folsom

Remove Existing Lawn and Weeds:

• Use a turf cutter or spade to remove existing grass and a few inches of soil to accommodate the base layer.

Ensure Proper Drainage:

• The base should have a slight slope (about 1% grade) away from buildings to prevent water pooling.

Installing a Weed Barrier (Not Always Needed): 

• Lay down a geotextile weed barrier to prevent weeds while allowing for drainage.

Add and Compact the Base Material:

• Spread the crushed base material to a depth of about 3-4 inches.
• Wet the area slightly and use a compactor to solidify the base, ensuring it’s level and smooth.

3. Laying the Synthetic Turf 

Roll Out the Artificial Grass:

• Roll out the turf over the prepared base. Allow it to rest for a couple of hours or more to eliminate any creasing and to let the turf acclimate.

Trim Edges:

• Use a sharp utility knife to cut the turf to the shape of your area, leaving a little extra for final adjustments.

Secure the Turf:

• Nail or staple the edges of the turf every 6 inches. Ensure the nails are not too tight to allow the turf some movement.

4. Seaming (if required)

• If your installation requires multiple pieces of turf, you’ll need to seam them together.
• Lay the pieces next to each other, ensuring the blades point in the same direction and there are no gaps.
• Fold back the edges, place seaming tape underneath, and apply the adhesive. Press the edges into the glue, making sure not to glue the grass blades.

5. Adding Infill

• Infill helps to keep the grass blades upright, adds weight to the turf, and aids in drainage.
• Spread the recommended type and amount of infill evenly across the turf.
• Use a broom or a mechanical brush to work the infill into the base of the grass.

6. Finishing Touches of your Synthetic Turf

• Brush the turf up with a stiff broom or a mechanical brush to give it a lush, natural look.
• Trim any excess turf from the edges to ensure a clean, neat border around your new lawn.

Maintenance in Folsom

• Although low-maintenance, artificial grass still needs care to keep it looking its best.
• Regularly remove leaves and debris, rinse off any spills or pet waste, and brush the fibers to keep them standing upright.

Installing artificial grass is a significant but manageable project that can dramatically enhance the appearance and functionality of your outdoor space. With careful planning, precision, and a bit of hard work, homeowners can enjoy a beautiful, durable lawn for years to come.