How to Cut Artificial Grass
How to cut artificial grass: from the back along the stitch rows with a turf knife, trimming stray blades with carpet scissors, taken from Artificial Grass & Landscaping's own installation page. The store does not sell cutting tools, and this page says so. As of November 13, 2026.
How do you cut artificial grass?
From the back, with a turf knife. Artificial Grass & Landscaping's installation steps flip the turf onto its backside and cut it to fit, running the blade between the stitch rows so you part the backing, not the blades. Roll the turf out in the sun first, blades face down, so it is easier to work with.
Cutting from the back, between the stitch rows, keeps the blades whole and the seam tight. The whole install, in order: artificial grass installation.
How do you cut artificial grass to fit?
Four steps, from Artificial Grass & Landscaping's own installation page. Relax the turf in the sun, lay every piece with its stitch rows running one way, flip it over and cut to fit on the backside with a turf knife, then trim any stray blades on top with carpet scissors so the cut edge looks clean.
- Roll the turf out in the sun, blades face down, for at least 1-2 hours first: it is easier to work with.
- Lay every piece with its grain, the stitch rows, running in one direction.
- Flip the turf onto its backside and cut it to fit with a turf knife.
- Trim any stray blades with carpet scissors.
How do you cut the edges for a clean seam?
Cut both edges straight down a stitch row from the back, so the two pieces butt together with the gap matching the stitch spacing. Artificial Grass & Landscaping then joins them over seaming tape; the full gluing and nailing is on the how-to-glue guide, so this page stops where the cut ends.
Joining the two cut pieces, with seaming tape and DC5 adhesive: how to glue artificial grass. The spacing at the seam should match the stitch rows, with no slack.
What do you cut artificial grass with?
A turf knife and carpet scissors, the two tools Artificial Grass & Landscaping's installation page names for cutting and trimming. The store sells turf, infill and installation supplies, but it does not sell or rent cutting tools, so bring a sharp turf or utility knife and keep spare blades on hand.
| Tool | What it is for | Sold here? |
|---|---|---|
| Turf knife or utility knife | Cutting the turf to fit, from the backside | No, bring your own |
| Carpet scissors | Trimming stray blades on top | No |
| Spare blades | Keeping cuts clean through the backing | No |
The full DIY tool checklist, and the supplies the store does sell: artificial grass installation tools and installation supplies.
Is cutting artificial grass safe?
Treat the knife like any sharp blade. Artificial Grass & Landscaping gives no safety rating for the job, so use plain care: cut on a firm surface, draw the blade away from your body and hands, keep children clear, and swap a dull blade for a fresh one rather than forcing a ragged cut through the backing.
A fresh, sharp blade cuts cleaner and safer than a dull one forced through the backing. Cut away from seams and fittings you want to keep, and measure twice before the blade goes down.
Would you rather have the turf cut and installed?
We provide contractors: independent, third-party contractors measure, cut and install turf within 40 miles of Rancho Cordova. Artificial Grass & Landscaping sells the turf and supplies, and the contractor is paid after the turf is installed. Order about 2 feet of extra length, since cut pieces run within 1 ft of the size ordered.
We provide contractors: installation is done by independent, third-party contractors, not by Artificial Grass & Landscaping staff. Contractor services are available within 40 miles of the Rancho Cordova warehouse; further out, contact us first.
Pickup at the Rancho Cordova warehouse is free. Local delivery is $279.00 for the first roll or cut piece and $99.00 for each additional one, with supplies riding along at no extra charge; curbside delivery to cities elsewhere in California, Nevada, Oregon, Arizona, Texas, New Mexico and Washington is $449.00 per roll, cut piece or item.
What this page can't tell you
- Cutting tools to buy or rent: Artificial Grass & Landscaping sells none and names no blade brand.
- Cutting tight curves or around posts and trees: the steps here are for straight cuts and simple shapes: artificial grass under trees covers cutting around a trunk.
- Joining the pieces once cut: that is seaming, on how to glue artificial grass.
- A re-cut if you measure short: order about 2 feet of extra length, since cuts run within 1 ft of the size ordered.
Questions and answers
How do you cut artificial grass?
Flip the turf onto its backside and cut it to fit with a turf knife, running the blade between the stitch rows, the way Artificial Grass & Landscaping's installation page shows. Roll the turf out in the sun first so it is easier to work with, and trim stray blades with carpet scissors.
What is the best tool to cut artificial grass?
A sharp turf or utility knife for the backing, and carpet scissors for trimming stray blades: the two tools Artificial Grass & Landscaping's installation page names. The store does not sell or rent cutting tools, so bring your own and keep spare blades.
Do you cut artificial grass from the top or the back?
From the back. Flip the turf onto its backside and cut between the stitch rows, so you part the backing and not the blades. This keeps the blades whole and the cut edge tight for a clean seam, as Artificial Grass & Landscaping's steps describe.
Does Artificial Grass & Landscaping sell turf-cutting tools?
No. Artificial Grass & Landscaping sells turf, infill and installation supplies such as nails, staples, seaming tape, glue and edging, but it does not sell or rent cutting tools. Bring a sharp turf knife and carpet scissors, with spare blades.
Next steps
Warehouse, office and samples: 3667 Omec Park Drive, Rancho Cordova, CA 95742 · (916) 370-5527 (call or text)
Prices and charges as of November 13, 2026; the product pages and checkout always show the current figure.